
BenQ LU935ST Projector
We recommend
-
Sapphire Fixed Frame 350 x 218cm Front Projector Screen 16:10 158" Diag SFSC350-10In stockDiagonal in Inches 158Viewing Width (cm) 350Aspect Ratio 16:10Front or Rear Projection FrontTop Border 80mmSide Border (Per Side) 80mmBottom Border 80mmWeight (kg) 24.00
-
Sapphire Electric Tab Tensioned 301x188.1cm Projector Screen 16:10 128" SETTS300WSF-AW10In stockDiagonal in Inches 128Viewing Width (cm) 301Aspect Ratio 16:10Front or Rear Projection FrontTop Border 400mmSide Border (Per Side) 80mmBottom Border 65mmWeight (kg) 31.00
Reproduce True-to-life Images for Totally Immersive Experiences (T/R 0.81-0.89)
- 5500 ANSI Lumens For Big screens: Easily fill large screens up to 6.5 metres wide
- Amazing Colour Qccuracy: sRGB mode for 92% rec 709 colour accuracy and golf mode for vivid grass and sky
- Fast Mode: Latency<17ms (@WUXGA/60Hz) response enables realistic simulation and gaming
- Hassle-Free Installation: With V/H lens shift, 2D keystone and corner fit
- Maintenance Free Design: Sealed IP5X laser engine means no dirty projector filters and 20,000 hour laser life

Short Throw Lens
Ideal for golf/flight simulation and retail applications, the LU935ST is equipped with a short-throw lens that will fill up a 12 foot wide screen from less than 10 feet away. This enables you to place the projector so that you can stand closer to the screen without casting a shadow.
|
Zoom Lens and Lens Shift for Mounting Flexibility The LU935ST features both a zoom function and vertical/horizontal lens shift to enable you to mount the projector in a protected area, while still letting you have a fully aligned image on your screen. You can move the image up and down up to 60% of the screen height – and adjust the horizontal position by 23% for an off-axis mounting location. The zoom lens can enlarge or reduce the image to enable you to move your mounting position as much as a foot on a fourteen foot wide screen. |
![]() |
Digital Keystone and Corner Fit
Digital Keystone enables you to easily correct for vertical projector tilt, or if the projector is not square to the screen. With a few simple taps on the remote, you can adjust the image so that it properly fills your screen. BenQ’s corner fit technology allows you to identify and adjust the images to stretch or pull back the image to the four corners of your screen.
Digital Shrink Adjustment
Digital Shrink enables you to mount the projector farther back from the screen and digitally adjust the image in 0.5% increments to correctly fit the screen. This is especially helpful in a golf simulator so the projector can be placed safely behind the hitting area.
![]() |
360 Degree Installation for Portrait or Custom Screens The BenQ LU953ST can be mounted in any position, including sideways for a portrait image, or vertically for floor simulators without compromising performance or reliability. This is ideal for flight simulators or other specialty environments with unconventional screen locations. |
White Balance Adjustment
BenQ exclusive White Balance Adjustments can reduce white balance variables between images projected from different projectors to such a low level that most people cannot see any difference. This allows for seamless and accurate picture quality without disruptive discrepancies.
Projector Blending Tools
If your environment requires multiple projectors to be blended together, the BenQ LU935ST enables you to adjust the white points on each projector, as well as the light output to ensure an immersive smooth blended image with multiple projectors.
![]() |
![]() |
|
IP5X DustGuard™ Pro for Superior Dustproofing Sealed Engine BenQ LU935ST laser projector is designed with sealed laser modules and enclosed light engines to protect the DMD chip, colour wheel sensor, laser bank, and other optical components. It effectively eliminates colour wheel sensor failure, visible spots on the image and colour decay to significantly reduce service costs and downtime. The design has passed the dust chamber test standard JIS Class IP5X for superb dust protection. |
Anti-Dust Accumulation Sensor to Resist Dust Buildup Incorporating a colour wheel sensor with an ingenious anti-dust build-up features, BenQ LU935ST prolongs optimal performance by repelling dust that can accumulate on traditional sensor to block the IR signal and cause flickering, abnormal colours, or even shutdown. |
HDBaseT Compatibility
Groundbreaking HDBaseT connectivity combines video, audio and device control signals from multiple sources including PCs, laptops, document cameras, Blu-ray and DVDs, onto a single CAT5 cable, capable of seamless transmissions up to 100 meters.
Wired Remote Control
Wired Remote Control offers projector installers and IT managers extra set-up convenience and ease of operation. The added wired control functionality makes the device a dependable choice for projector installation adjustment.
Remote Control Projector ID Setting for Independent Control
Installers and IT managers can assign a specific remote control ID to each projector, avoiding signal interference and unintentional changes when installing multiple projectors in a venue.
Lag-Busting Response with Fast Mode
Based on expertise gained from experience with near-zero latency displays used in gaming, LU935ST employs a Fast Mode to provide latency as low as 16.67ms so that audience benefit from responsive and realistic interactive scene when having fun.

Dual Colour Wheels Produce 92% Rec.709 Colour Coverage for Optimal Colour Performance
LU935ST’s powerful laser projection utilises a dual colour wheel system to produce unparalleled colour performance that achieves a 92% Rec.709 colour coverage. By increasing colour ratios and the purity of RGBY colour, LU935ST dramatically enhances colour saturation to ensure superior presentation quality.
High Brightness Vivid Clarity in Bright Ambient Environments
LU935ST’s 5500lms high brightness produces wondrous displays in bright, compact exhibition spaces with superb image quality.

Laser-Powered Ultra-High Contrast
LU935ST laser projector creates strikingly clear images with stratospherically high 3,000,000:1 contrast ratio for true deep blacks, vivid rich colours and fine subtle details. The LU935ST also features spontaneous response, requiring no wait to turn on or resume from blanking in true black for flexible performance capability.
Laser Light Creates Value Over Time
BenQ projectors feature laser light source guaranteed for 20,000 hours of maintenance-free operation, saving costs for lamp replacement and maintenance. Based on the average brightness cut off of typical long-life lamps, value exceeds that of 10 lamp replacements over the life of the projector.

BenQ centralised control software is a management tool for computers that enables remote and centralised management of multiple digital projectors by IT administrators/technicians via a local network. The management capabilities include the possibility to remotely monitor, control, and configure projectors individually or as groups.
Network/Web Control
BenQ laser projectors are compatible with Creston, AMX and PJ Link control systems for convenient system integration with various third-party components and reduced cost to centrally maintain multiple projectors.
| Item | 9H.JNC77.15E |
|---|---|
| Weight (kg) | 7.000000 |
| EAN | 4718755084188 |
| Technology | DLP |
| HDMI Inputs | 2 |
| Input Lag (ms) | 16.7 |
| Contrast | 3,000,000 |
| Lumens | 5500 |
| Throw Ratio | 0.81-0.89 |
| Resolution (Native) | WUXGA 1920x1200 |
| Light Source | Laser |
| Light Source Life (Est.) | 20000 |
| More Info. | 5 Year Warranty |
Delivery Rates to mainland UK (excluding large and/or heavy items)
Delivery is to ground floor/kerbside only, if you have special delivery instructions you must contact us to ensure that we can have the best chance of success in delivering the item. We required items to be signed for.
Delivery dates are Monday to Friday unless otherwise specified
Delivery cut off is 3-4pm on most items - earlier time exceptions are large items, high value items, items requiring a pallet (i.e bulk orders) or items which direct ship from the manufacturer or supplier. If you order after cut-off then the order is processed the next day, that means if you ordered Tuesday at 8pm at night, the next day delivery option (if applicable) is Thursday as the order is processed on the Wednesday.
On a large number of items we offer a free delivery service.
Delivery Rates to Highlands, Islands, Northern Ireland & Remote Areas - (excluding screens and Touch Screens)
Non mainland and the Highlands and Islands - this includes anything that goes over water that does not have road access. These rates are determined by couriers based on postcode. If there are multiple items then we may need to quote you for delivery.
This should automatically calculate at the checkout when you enter your address, but sometimes needs to be calculated on a case-by-case basis, please contact us for a quote in this instance.
Screens & Digital Displays
These also have a standard rate ranging upwards from £15 + VAT depending on the size of the product and delivery location, for particularly large/heavy items this is quoted on a case-by-case basis please contact us for a price.
Delivery Rates to Republic of Ireland & rest of EU
We can still ship most items outside of the UK, however, this is quoted on a case-by-case basis so orders cannot be placed through the online checkout without a quoted delivery fee. We can also supply the goods with zero-rated VAT for exports outside the UK. Goods are supplied on DAP Incoterms for exports and we can also accomodate for you to use your own courier to collect the goods from us.
Returns
Faulty Items
Goods Reported Faulty Within 14 Days of Receipt.
If you have a faulty item and are reporting the fault within 14 days of receipt. When the goods are returned to us complete, we’ll issue a full refund to you via your original payment method. We will try and ensure that there is a fault, that often requires is running diagnostics or getting the manufacturer to speak to you directly to determine whether there is a genuine fault rather than just a set up error.
Goods Damaged in Transit
If your goods were damaged in transit it must be reported to us within 3 days. If goods are visibly damaged on receipt the delivery note must be marked accordingly. Once the damaged goods have been collected and received back into our warehouse, we’ll issue a refund via your original payment method. We will require pictures of the damage.
Consumers - If You Have Changed Your Mind – this is for personal use not business or organisations
If you are a private consumer and have changed your mind as long as the goods have not been in your possession for over 14 days, and the item can be sold again as new, then you are entitled to return the goods to us. If the item you are returning is a projector, the lamp hours used must not have exceeded 2 hours otherwise a re-stocking fee will be applied. The cost of returning items is the responsibility of the customer. As new means in original packaging with complete accessory packs and manuals. If any item is marked/damaged, including the packing, there may be a restocking fee. Please contact us directly before sending any goods back to obtain an RMA number without this there may be a delay in dealing with your return. If you purchased for a company, or an organisation you are not deemed a Consumer by law.
About Just Projectors
We’re here to help you choose the right projector or display - we've been doing it since 2001. Call us to talk through your requirements with our trained team. For higher-end models, we may be able to arrange a loan or demonstration.
We supply leading brands such as Epson, Sony, BenQ, ViewSonic, Panasonic and NEC. Because it’s easy to buy the wrong model, we offer real advice — not just an “add to cart” experience. We compare products side-by-side, offer a price promise, and only supply UK stock for stronger warranty support and genuine peace of mind. We avoid low-quality brands with unverified lumen and resolution claims.
We deliver across the UK and Ireland, with a 2–4 day service to Ireland.









